Standard
Taper Short I.D. Wheel Extensions.*
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF
TAPER. FOR A SMALL RADIUS OR THAT ONE SMALL SLOT. SAVE THE
EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT.
|
 |
|
All SHORT IDWEs come with a floating nut spacer 00662 (FN-1), two flanges,
and a wheel end-nut. The hex spindle nut must be selected separately to
suit your machine. Most grinders use 1/2-13LH or 1/2-13RH threads. A
1-1/4" wrench flat on the body makes installation and removal easy.
CHECK THESE FEATURES!
-
ALL DIAMETERS GROUND for
concentricity.
-
PRECISION INTERNAL TAPER for proper
spindle mating.
-
ALL COMPONENT PARTS HEAT TREATED
for strength and long life.
-
THREAD GROUND EXTERNAL THREADS for
maximum concentricity and squareness.
-
SPECIALS can be made to your
requirements. Please specify wheel OD, width, and ID.
| SOPKO
CATALOG NO. |
SOPKO
PART NO. |
DIMENSIONS |
| A |
B |
C |
D |
| 00759 |
200-3/8LH-S |
1/2
to 3/4 |
1-1/2 |
3-7/8 |
3/8-16LH
HEX |
| 00760 |
200-3/8RH-S |
1/2 to 3/4 |
1-1/2 |
3-7/8 |
3/8-16RH HEX |
| 00761 |
|
1/2 to 3/4 |
2 |
3-7/8 |
3/8-16LH HEX |
| 00762 |
|
1/2 to
3/4 |
2 |
3-7/8 |
3/8-16RH HEX |
| 00763 |
200-1/2LH-S |
3/8
to 5/8 |
1-1/2 |
3-7/8 |
1/2-13LH
HEX |
| 00764 |
200-1/2RH-S |
3/8 to 5/8 |
1-1/2 |
3-7/8 |
1/2-13RH HEX |
| 00765 |
|
3/8 to 5/8 |
2 |
3-7/8 |
1/2-13LH HEX |
| 00766 |
|
3/8 to 5/8 |
2 |
3-7/8 |
1/2-13RH HEX |
| 00769 |
|
1/2 |
2 |
3-7/8 |
5/8-18LH
HEX |
| 00770 |
|
1/2 |
2 |
3-7/8 |
5/8-18RH HEX |
| 00773 |
|
1/2 |
2 |
4 |
3/4-16LH
HEX |
| 00774 |
|
1/2 |
2 |
4 |
3/4-16RH HEX |
| 00775 |
200-1LH-S |
1/2 |
2-1/2 |
4 |
1-20LH
ROUND |
| 00776 |
200-1RH-S |
1/2 |
2-1/2 |
4 |
1-20RH
ROUND |
|
| |
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation. |
 |
CAUTION!
Always Wear Safety Goggles When Griding. |
16 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
|
|
Standard Taper Long I.D. Wheel Extensions.*
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.
SAVE BOTH THE EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT. |
|
|
|
All LONG IDWEs come with a floating nut spacer 00662 (FN-1), two flanges, and a wheel end-nut. The hex spindle nut must be selected separately to suit your machine. Most grinders use
1/2-13LH or 1/2-13RH threads. A 13/16” wrench flat on the step makes installation and removal easy. See page 76 for available hex spindle nut sizes. Extends grinding wheels 13/16" further from spindle nose than the short series ID wheel extensions shown on page 16. |
|
|
|
|
00777 |
|
|
00783 |
|
|
|
|
|
00787 |
|
|
00791 |
|
|
|
|
SOPKO
CATALOG NO. |
SOPKO
PART NO. |
DIMENSIONS |
 |
|
| A |
B |
C |
D |
|
| 00777 |
200-3/8LH-L |
1/2 to 3/4 |
1-1/2 |
4-13/16 |
3/8-16LH HEX |
| 00778 |
200-3/8RH-L |
1/2 to 3/4 |
1-1/2 |
4-13/16 |
3/8-16RH HEX |
| 00779 |
|
1/2 to 3/4 |
2 |
4-13/16 |
3/8-16LH HEX |
| 00780 |
|
1/2 to 3/4 |
2 |
4-13/16 |
3/8-16RH HEX |
|
| 00781 |
200-1/2LH-L |
3/8 to 5/8 |
1-1/2 |
4-13/16 |
1/2-13LH HEX |
| 00782 |
200-1/2RH-L |
3/8 to 5/8 |
1-1/2 |
4-13/16 |
1/2-13RH HEX |
| 00783 |
|
3/8 to 5/8 |
2 |
4-13/16 |
1/2-13LH HEX |
| 00784 |
|
3/8 to 5/8 |
2 |
4-13/16 |
1/2-13RH HEX |
|
| 00787 |
|
1/2 |
2 |
4-13/16 |
5/8-18LH HEX |
| 00788 |
|
1/2 |
2 |
4-13/16 |
5/8-18RH HEX |
|
| 00791 |
|
1/2 to 1 |
2 |
4-13/16 |
3/4-16LH HEX |
| 00792 |
|
1/2 to 1 |
2 |
4-13/16 |
3/4-16RH HEX |
|
*For smaller wheels, ID wheel extensions can be supplied with wheelscrews.
*See page 74 for available flanges. |
| |
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation. |
|
CAUTION!
Always Wear Safety Goggles When Griding. |
17 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
|
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
|
|
Cincinnati Taper Old Style I.D. Wheel
Extension Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.
FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.
SAVE BOTH THE EXPENSE AND THE SET-UP TIME OF A HIGH SPEED ATTACHMENT. |
|
|
|
CHECK THESE FEATURES!
- GROUND diameters for CONCENTRICITY.
- HEAT TREATED for STRENGTH and SAFETY.
- PRECISION GROUND taper for RELIABLE spindle mating.
- IN STOCK for immediate shipment.
|
|
|
 |
|
|
13426* |
 |
|
Designed for added reach, the IDWE comes complete with a 1/2-13 hex spindle nut.
A 1/2-13 draw thread locks the extension onto the spindle.
A 1-1/16" wrench flat on the body makes installation and removal easy. |
|
|
|
SOPKO
CATALOG NO. |
SOPKO
PART NO. |
DIMENSIONS |
|
|
|
| A |
C |
D |
|
|
|
| 13458 |
134518-LH |
3/8 to 1/2 |
4-1/2 |
1/2-13LH |
|
| 13426 |
134269-RH |
3/8 to 1/2 |
4-1/2 |
1/2-13RH |
|
|
|
Standard taper (3.000" TPF) ID wheel extension adapters on page 16 and 17.
*Grinding wheel not included. |
|
|
 |
|
|
78515* |
|
|
Identical to the long series above but 2" shorter OAL. Has a 1/2-13 hex spindle nut.
A 1/2-13 draw thread locks the extension onto the spindle.
A 1-1/16" wrench flat on the body makes installation and removal easy. |
|
|
|
SOPKO
CATALOG NO. |
SOPKO
PART NO. |
DIMENSIONS |
|
|
|
| A |
C |
D |
|
|
|
| 13456 |
134516-LH |
3/8 to 1/2 |
2-1/2 |
1/2-13LH |
|
| 78515 |
78515-RH |
3/8 to 1/2 |
2-1/2 |
1/2-13RH |
|
|
|
Standard taper (3.000" TPF) ID wheel extension adapters on page 16 and 17.
*Grinding wheel not included. |
|
| |
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation. |
|
CAUTION!
Always Wear Safety Goggles When Griding. |
39 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
|
|
|
|
Cincinnati Taper New Style I.D. Wheel Extensions.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR .500" ID WHEELS.
FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.
SAVE BOTH THE EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT. |
|
|
|
| Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. The 3/8-16RH thread on the arbor 04271 acts as a draw thread to pull the extension onto the taper and a 3/4" wrench flat makes installation and removal easy. The extension comes complete with two 1-1/2" mating side flanges 00053 (F4), a 1/2-13RH hex spindle nut 05002, and an extension body 04272. |
|
|
|
|
55000 |
|
|
|
SOPKO
CATALOG NO. |
SOPKO
PART NO. |
|
|
|
|
|
| 55000 |
NS550 |
|
|
|
|
|
|
|
Standard taper (3.000 TPF) ID wheel extension adapters on page 16 and 17. |
|
|
|
Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper and furnished with two 2" mating side flanges 00054 (F1), a 1/2-13RH hex spindle nut 05002, and an extension body 04272. The 3/8-16RH thread on the arbor 04271 acts as a draw thread to pull the extension onto the taper, and a 3/4” wrench flat makes installation and removal easy. |
|
|
|
|
00483 |
|
|
|
|
|
|
SOPKO
CATALOG NO. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 00483 |
|
|
|
|
|
|
|
|
|
Standard taper (3.000 TPF) ID wheel extension adapters on page 16 and 17. |
|
|
| |
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation. |
|
CAUTION!
Always Wear Safety Goggles When Griding. |
40 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
|
|
Wheel Adapters for Older Makino (Kao Ming) Grinders.
18° 54' INC ANGLE TAPER WITH .87" DIAMETER AT LARGE END OF TAPER.*
FOR .500" AND 1.250" ID WHEELS. |
|
|
|
|
|
|
|
|
|
|
05254 |
|
|
|
|
SOPKO
CATALOG NO. |
DIMENSIONS |
|
|
|
|
|
|
A |
C |
D |
|
|
|
|
|
|
|
05254 |
1/2 to 3/4 |
1-13/16 |
1-1/4-16RH |
|
|
|
05267 |
1/2 |
1-5/16 |
1-1/4-16RH |
|
|
|
05273 |
3/4 to 1 |
2 |
1-1/4-16LH |
|
|
|
05265 |
3/4 to 1 |
2 |
1-1/4-16RH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50046 |
|
|
|
SOPKO
CATALOG NO. |
DIMENSIONS |
|
|
|
|
|
A |
C |
D |
F |
|
|
|
|
|
50046 |
3/4 to 1 |
3 |
1-1/4-16RH |
1-7/16 |
|
|
50047 |
3/4 to 1 |
3-7/8 |
1-1/4-16RH |
2-5/16 |
|
|
|
|
|
This older Makino ID wheel extension adapter is furnished complete with two 1-1/2” diameter flanges 00053 (F-4), a 1/2-13RH hex spindle nut 05002 (500-2), arbor 00638, and body 01837. A 3/4” wrench flat on the arbor makes installation and removal easy. |
|
|
|
|
|
SOPKO
CATALOG NO. |
|
|
|
05266 |
|
|
05266 |
|
|
|
|
|
|
|
|
|
|
|
* New Makino grinders use 4.500” TPF with .87” diameter at large end. See page 31 through 41. |
|
| |
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation. |
|
CAUTION!
Always Wear Safety Goggles When Griding. |
58 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
|