Standard
Taper Short I.D. Wheel Extensions.*
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF
TAPER. FOR A SMALL RADIUS OR THAT ONE SMALL SLOT. SAVE THE
EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT.
All SHORT IDWEs come with a floating nut spacer 00662 (FN-1), two flanges,
and a wheel end-nut. The hex spindle nut must be selected separately to
suit your machine. Most grinders use 1/2-13LH or 1/2-13RH threads. A
1-1/4" wrench flat on the body makes installation and removal easy.
CHECK THESE FEATURES!
-
ALL DIAMETERS GROUND for concentricity.
-
PRECISION INTERNAL TAPER for proper spindle mating.
-
ALL COMPONENT PARTS HEAT TREATED for strength and long life.
-
THREAD GROUND EXTERNAL THREADS for maximum concentricity and squareness.
-
SPECIALS can be made to your requirements. Please specify wheel OD, width, and ID.
| SOPKO CATALOG NO. | SOPKO PART NO. | DIMENSIONS | |||
| A | B | C | D | ||
| 00759 | 200-3/8LH-S | 1/2 to 3/4 | 1-1/2 | 3-7/8 | 3/8-16LH HEX |
| 00760 | 200-3/8RH-S | 1/2 to 3/4 | 1-1/2 | 3-7/8 | 3/8-16RH HEX |
| 00761 | 1/2 to 3/4 | 2 | 3-7/8 | 3/8-16LH HEX | |
| 00762 | 1/2 to 3/4 | 2 | 3-7/8 | 3/8-16RH HEX | |
| 00763 | 200-1/2LH-S | 3/8 to 5/8 | 1-1/2 | 3-7/8 | 1/2-13LH HEX |
| 00764 | 200-1/2RH-S | 3/8 to 5/8 | 1-1/2 | 3-7/8 | 1/2-13RH HEX |
| 00765 | 3/8 to 5/8 | 2 | 3-7/8 | 1/2-13LH HEX | |
| 00766 | 3/8 to 5/8 | 2 | 3-7/8 | 1/2-13RH HEX | |
| 00769 | 1/2 | 2 | 3-7/8 | 5/8-18LH HEX | |
| 00770 | 1/2 | 2 | 3-7/8 | 5/8-18RH HEX | |
| 00773 | 1/2 | 2 | 4 | 3/4-16LH HEX | |
| 00774 | 1/2 | 2 | 4 | 3/4-16RH HEX | |
| 00775 | 200-1LH-S | 1/2 | 2-1/2 | 4 | 1-20LH ROUND |
| 00776 | 200-1RH-S | 1/2 | 2-1/2 | 4 | 1-20RH ROUND |
| Standard Taper Long I.D. Wheel Extensions.* 3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER. FOR A SMALL RADIUS OR THAT ONE SMALL SLOT. SAVE BOTH THE EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT. |
||||||
| All LONG IDWEs come with a floating nut spacer 00662 (FN-1), two flanges, and a wheel end-nut. The hex spindle nut must be selected separately to suit your machine. Most grinders use 1/2-13LH or 1/2-13RH threads. A 13/16” wrench flat on the step makes installation and removal easy. See page 76 for available hex spindle nut sizes. Extends grinding wheels 13/16" further from spindle nose than the short series ID wheel extensions shown on page 16. |
||||||
|
||||||
| 00777 | 00783 | |||||
|
||||||
| 00787 | 00791 | |||||
| SOPKO CATALOG NO. |
SOPKO PART NO. |
DIMENSIONS |  |
|||
| A | B | C | D | |||
| 00777 | 200-3/8LH-L | 1/2 to 3/4 | 1-1/2 | 4-13/16 | 3/8-16LH HEX | |
| 00778 | 200-3/8RH-L | 1/2 to 3/4 | 1-1/2 | 4-13/16 | 3/8-16RH HEX | |
| 00779 | 1/2 to 3/4 | 2 | 4-13/16 | 3/8-16LH HEX | ||
| 00780 | 1/2 to 3/4 | 2 | 4-13/16 | 3/8-16RH HEX | ||
| 00781 | 200-1/2LH-L | 3/8 to 5/8 | 1-1/2 | 4-13/16 | 1/2-13LH HEX | |
| 00782 | 200-1/2RH-L | 3/8 to 5/8 | 1-1/2 | 4-13/16 | 1/2-13RH HEX | |
| 00783 | 3/8 to 5/8 | 2 | 4-13/16 | 1/2-13LH HEX | ||
| 00784 | 3/8 to 5/8 | 2 | 4-13/16 | 1/2-13RH HEX | ||
| 00787 | 1/2 | 2 | 4-13/16 | 5/8-18LH HEX | ||
| 00788 | 1/2 | 2 | 4-13/16 | 5/8-18RH HEX | ||
| 00791 | 1/2 to 1 | 2 | 4-13/16 | 3/4-16LH HEX | ||
| 00792 | 1/2 to 1 | 2 | 4-13/16 | 3/4-16RH HEX | ||
*For smaller wheels, ID wheel extensions can be supplied with wheelscrews. |
||||||
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
