Wheel Adapters for Grinding Machines
Manufactured by ANCA, Victoria, Australia.

19° 05' 06" INC ANGLE TAPER AND 3.500" TPF WITH .85", 1.02", AND 1.38"
DIAMETER AT LARGE END OF TAPER.


A Sopko innovation, Double Taper ANCA Conversion Adapters offer convenience and flexibility. Now, you can use conventional machines to accurately dress wheel-packs mounted on ANCA adapters without losing valuable production time. Two precision ground tapers provide reliable spindle and adapter mounting. Made from quality alloy steel, ANCA Double Taper Conversion Adapters are heat treated for strength, long-life, and rigidity. Diameters are ground for concentricity and squareness. These fine Sopko features combine to maintain the original high quality standards of the ANCA Fastgrind system. A 1-1/4” wrench flat on the body makes installation and removal easy.


FIG. 1

 
FIG. 2


FIG. 3

50193

SOPKO
CATALOG NO.
FIG. DIMENSIONS

B C D F G T MACHINE

50194 1

1-1/2

3

3/8-16RH

2-1/4

.85

19° 05' 06"

TG4


50354 1

1-1/2

3-3/8

M12X1.75RH

1-7/8

1.38

3.500

TG7/DM7

50192 1

1-1/2

3-3/8

M12X1.75RH

1-7/8

1.38

3.500

TG7/DM7

50178 2

2

3-1/2

M12X2.0RH

2-1/4

1.38

3.500

TG7/DM7

01150 3

80MM (3.15”)

3-7/16

M12X1.75RH

1-15/16

1.38

3.500

TG7/DM7


50193 1

1-1/2

3

M8X1.25RH

1-15/16

1.02

3.500

MG7/RG7/RGX

00497 1

1-1/2

3-23/32

M8X1.25RH

2-5/8

1.02

3.500

MG7/RG7/RGX


See ANCA spacers on page 75 and accessories on page 81 and 83.
See ANCA Mount/Dismount fixture on page 94.


SPINDLE MOUNTING BOLT AND LOCK WASHER SETS

SOPKO
CATALOG NO.
MACHINE THREAD LENGTH

00664 TG4 (00621) 3/8-16RH 2-3/4

00664

                 00666

00897 TG4 (00622) 3/8-16RH 4
01034 TG4 (00623) 3/8-16RH 1-3/4
01053 TG4 (00624) 3/8-16RH 3/4
01101 TG4 (00620) 3/8-16RH 4-1/2
00665 TG7/DM7 M12XP1.75RH 30MM (1.18”)

00665

00667
00667 TG7 (50163) M12XP1.75RH 100MM (3.94”)
00666 MG7/RG7 M8XP1.25RH 30MM (1.18”)

RECESSED WASHERS

SOPKO
CATALOG NO.
MACHINE OD ID THICKNESS

00162 TG4 21MM (.83”) 10MM (.39”) 6MM (.24”)
00163 TG7/DM7 33MM (1.30”) 13MM (.51”) 7MM (.28”)
00164 MG7/RG7 22MM (.87”) 8.5MM (.33”) 15MM (.59”) 00164

                00163                  00162

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

45

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Tools and Accessories for Wheel Adapters.
FLOATING NUT SPACERS, BOLTS, RINGS, STUDS, AND SET SCREWS.

 
00662 (FN-1) Floating nut spacer. 11/16" ID hex. Black oxide finish. For standard taper collet chuck extension adapters, long and short IDWEs, male extensions, and older style Cincinnati collet chuck extensions.

00663 (ENFN-1) Same as 00662 above but Electroless Nickel finish.

01244 (FN-2) Floating bolt spacer for new style Cincinnati collet chuck extension adapter 00679 (C200-CCEA-KW). 3/8" bore. Black oxide finish.

01025 (FN-B) 3/8-16RH bolt for new style Cincinnati collet chuck extension adapter 00679 (C200-CCEA-KW). 1-1/4" long, 5/16" hex socket. Black oxide finish.

14362 (143627) 3/8-16RH spindle mounting bolt for new style Cincinnati adapters with 1/8" keyway in taper. 1-1/4" long, 5/16" hex, flanged head. Black oxide finish.

15671 (156171) 3/8-16RH flanged spindle mounting bolt for short new style Cincinnati extension 56172 (156172RH) with 1/8" keyway in taper. 3-1/4" OAL, 5/16" hex. Black oxide finish.

15674 (156174) 3/8-16RH flanged spindle mounting bolt for long new style Cincinnati extension 56173 (156173RH) with 1/8" keyway in taper. 5-1/4" OAL, 5/16" hex. Black oxide finish.

04249 3/8-16RH flanged spindle mounting bolt for conversion style Cincinnati adapter 50081,
2-7/8" OAL, 5/16" hex socket. Black oxide finish.

01829 This Cincinnati conversion stud allows use of “old style” adapters on new style spindles. 1/2-13RH thread, .69” long steps to 3/8-16RH thread, .81” long. 1-1/2” OAL.
3/16” hex socket on both ends.

04269 Series 4000 retaining ring for new style Cincinnati adapters.

04278 #29 music wire lock ring to hold spindle nuts in Pope style adapters.

00825 Cup-Point 3/8-24 alloy socket set screws for Pope balancing weights.

00939 #10-32 nylon-tipped socket set screw for BR1 balancing rings, 00186 and 00187 nuts.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

84

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888