Tools
and Accessories for Wheel Adapters.
SPANNER WRENCHES.
|
|
| Computer aided design and
state-of-the-art manufacturing are combined to produce these versatile and
practical wrenches. Drop forged, and heat treated to optimize strength and
toughness, Sopko wrenches are made for performance. Thin wall box end
construction provides the added clearance needed to free stubborn spindle
nuts in tight places. Pins and prongs are integrally forged with the
wrench for strength, then machined for a positive fit. |
|
|
35135 COMBINATION SPANNER AND HEX
SOCKET WRENCH.
This Sopko innovation replaces older slotted wrench designs.
7/32" diameter pins set 1-3/4" apart. 11/16" single hex
socket.
6-1/8" OAL. Black oxide finish.
|
|
10859
COMBINATION SPANNER AND PRONGED WRENCH.
7/32" diameter pins set 1-3/4" apart. Prongs 1/8" thick,
7/8" across. 6-1/32" OAL. Black oxide finish.
|
|
00424
(S424) FACE SPANNER WRENCH.
7/32" diameter pins set 1-3/4" apart.
6-1/8" OAL. Black oxide finish. |
|
00476
(PS35135T) HEAVY DUTY COMBINATION SPANNER
AND HEX SOCKET WRENCH.
7/32" diameter pins set 1-3/4" apart. 11/16" single hex
socket.
Oversized T-handle for extra leverage. 8-1/4" OAL.
Rust resistant finish. |
|
01255
T-HANDLE HEX SOCKET PULLER WRENCH.
Incorporates 11/16" single hex socket wrench and T-handle with an
adapter puller to create a one piece tool to remove adapters from spindle
tapers. 6-1/8" long. Black oxide finish. |
|
03869
ANCA TG7 WHEEL-PACK WRENCH.
Four 3/16" replaceable pins 01272 provide full nut engagement to
safely remove or tighten wheel-packs. A 5/8" wide knurled band and a
convenient 3/8" square drive make nut removal fast and easy.
Black oxide finish. |
|
|
Tools and Accessories for Wheel Adapters.
TRUING ARBORS. |
|
Provide a quick and easy way to accurately true Sopko adapter mounted grinding wheels.
Made from tough alloy steel, all Sopko truing arbors are hardened and ground to provide a long lasting precision mounting taper to simulate the spindle nose configuration.
|
|
| 00001 (100TA) For standard taper adapters having 3.000" TPF and 1.00" LE. Hardened and precision ground. 4-11/16" OAL. 1/2-13RH hex spindle nut furnished. (Most Popular) |
|
| 00078 (100-TA-LH) same as 00001 but 1/2-13LH hex spindle nut furnished. |
|
| 05248 Same as 00001 but 8" OAL. 1/2-13RH hex spindle nut furnished. |
|
00875 (875TA) For use with all Cincinnati taper adapters having
4.500" TPF and .87" LE. Hardened and precision ground.
4-1/4" OAL. 1/2-13RH hex spindle nut furnished. |
|
05292 For use with ANCA MG7/RG7 machines with
3.500" TPF and 1.02" LE. 4-11/16" OAL. Accepts spindle mounting bolt 00666 M8xP1.25RH . |
|
| 05293 For use with ANCA TG7/DM7 machines with 3.500" TPF and 1.38" LE. 4-11/16" OAL. Accepts spindle mounting bolt 00665 M12xP1.75RH . |
|
|
|
