Wheel Adapters for Grinding Machines
Manufactured by ANCA, Victoria, Australia.

19 05' 06" INC ANGLE TAPER AND 3.500" TPF WITH .85", 1.02", AND 1.38"
DIAMETER AT LARGE END OF TAPER.


A Sopko innovation, Double Taper ANCA Conversion Adapters offer convenience and flexibility. Now, you can use conventional machines to accurately dress wheel-packs mounted on ANCA adapters without losing valuable production time. Two precision ground tapers provide reliable spindle and adapter mounting. Made from quality alloy steel, ANCA Double Taper Conversion Adapters are heat treated for strength, long-life, and rigidity. Diameters are ground for concentricity and squareness. These fine Sopko features combine to maintain the original high quality standards of the ANCA Fastgrind system. A 1-1/4 wrench flat on the body makes installation and removal easy.


FIG. 1

 
FIG. 2


FIG. 3

50193

SOPKO
CATALOG NO.
FIG. DIMENSIONS

B C D F G T MACHINE

50194 1

1-1/2

3

3/8-16RH

2-1/4

.85

19 05' 06"

TG4


50354 1

1-1/2

3-3/8

M12X1.75RH

1-7/8

1.38

3.500

TG7/DM7

50192 1

1-1/2

3-3/8

M12X1.75RH

1-7/8

1.38

3.500

TG7/DM7

50178 2

2

3-1/2

M12X2.0RH

2-1/4

1.38

3.500

TG7/DM7

01150 3

80MM (3.15)

3-7/16

M12X1.75RH

1-15/16

1.38

3.500

TG7/DM7


50193 1

1-1/2

3

M8X1.25RH

1-15/16

1.02

3.500

MG7/RG7/RGX

00497 1

1-1/2

3-23/32

M8X1.25RH

2-5/8

1.02

3.500

MG7/RG7/RGX


See ANCA spacers on page 75 and accessories on page 81 and 83.
See ANCA Mount/Dismount fixture on page 94.


SPINDLE MOUNTING BOLT AND LOCK WASHER SETS

SOPKO
CATALOG NO.
MACHINE THREAD LENGTH

00664 TG4 (00621) 3/8-16RH 2-3/4

00664

                 00666

00897 TG4 (00622) 3/8-16RH 4
01034 TG4 (00623) 3/8-16RH 1-3/4
01053 TG4 (00624) 3/8-16RH 3/4
01101 TG4 (00620) 3/8-16RH 4-1/2
00665 TG7/DM7 M12XP1.75RH 30MM (1.18)

00665

00667
00667 TG7 (50163) M12XP1.75RH 100MM (3.94)
00666 MG7/RG7 M8XP1.25RH 30MM (1.18)

RECESSED WASHERS

SOPKO
CATALOG NO.
MACHINE OD ID THICKNESS

00162 TG4 21MM (.83) 10MM (.39) 6MM (.24)
00163 TG7/DM7 33MM (1.30) 13MM (.51) 7MM (.28)
00164 MG7/RG7 22MM (.87) 8.5MM (.33) 15MM (.59) 00164

                00163                  00162

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

45

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Wheel Adapter Parts.
Keyed Washers.

Make it safe, make it perform, and make it reliable-that’s what drives Sopko product design. Even the simple adapter washer is not too trivial to be overlooked in our attention to detail. Single-tang washer designs set up inherent out-of-balance conditions that are avoided with Sopko products manufactured with equal and opposite adapter hub key slots and DUAL-TANG washers. The separation provided by a washer prevents potential frictional wheel damage caused by nut contact, assuring every machine operator of safe wheel lock that is less likely to loosen under a load than ordinary adapters. There’s a trust between Sopko and its customers; we’re working hard every day to keep it!
 

00034

00012

05518

00000

00062 00008

00032


SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS DESCRIPTIONS

A B C

00000 062x1-3/4 1-3/4 1/16 1-1/4 For X200-1 & X200-2 adapters

00003 913-0-00-1007 1.85 1/16 1-1/4 For ANCA MG7 series adapters

00004 062x2 2 1/16 1-1/4 For Pope adapters 00529,00530,00531,00532,00533

00030 030x2-1/4 2-1/4 1/32 1-1/4
00005 * EN-030x2-1/4 2-1/4 1/32 1-1/4 Electroless nickel plated
00006 SS030x2-1/4 2-1/4 1/32 1-1/4 Stainless steel
00062 062x2-1/4 2-1/4 1/16 1-1/4
00007 - 2-1/4 1/16 1-1/4 For 222RWA adapter only
00008 * EN-062x2-1/4 2-1/4 1/16 1-1/4 Electroless nickel plated
00009 SS062x2-1/4 2-1/4 1/16 1-1/4 Stainless steel

00447 - 2-5/16 1/32 1-1/4

01250 - 2-3/8 1/32 1-1/4

00031 030x2-7/16 2-7/16 1/32 1-1/4
00032 062x2-7/16 2-7/16 1/16 1-1/4

00010 030x3 3 1/32 1-1/4
00033 062x3 3 1/16 1-1/4
00011 * EN-062x3 3 1/16 1-1/4 Electroless nickel plated
00012 96.5301.5005 3 1/16 2 For ANCA TG7 series adapters

00016 030x3-1/2 3-1/2 1/32 1-1/4
00034 062x3-1/2 3-1/2 1/16 1-1/4

00035 - 4-1/8 1/16 2 For IMM adapter 00691
00019 25-1569-3 4-1/8 1/16 3 For shrouded adapter 00691 AND 00692

04250 - 4-1/4 1/16 1-1/4 For larger wheel adapters 00696, 00555
00023 - 4-1/4 1/16 2
05518 - 4-1/4 1/8 3 For larger wheel adapters 01316, 01317

04293 - 4-3/4 1/8 3 For Norton S-3 balancing adapters 00824

05519 - 5 1/8 3 For larger wheel adapters 01324, 01330, 01337, 01338

05307 - 7 1/8 5 For larger wheel adapters 01335, 01336

* In stock, but Electroless nickel plating is available for all washers at additional cost.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

78

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888