Use Sopko Balancing Adapters to:

• Increase productivity.

• Reduce downtime and maintenance.

• Produce low micro-finishes.

• Reduce wheel wear and truing frequency.

• Reduce costly spindle failures.

**Furnished with two #10-32 nylon-tipped set screws 00939 on nut OD for reversing rotation applications.

00228

*Most Sopko adapters can be furnished with balancing rings.
*See page 65, 66, 67, 68, and 69 for large taper balancing adapters for larger grinders.
*See page 90, 91, and 92 for balancing stands and accessories.

12

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

*Most Sopko adapters can be furnished with balancing rings.
*See page 65, 66, 67, 68, and 69 for large taper balancing adapters for larger grinders.
*See page 90, 91, and 92 for balancing stands and accessories.

13

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

• A HARD PROTECTIVE SHELL providing outstanding protection against wear and abrasion.
• AN ECONOMICAL ALTERNATIVE to stainless steel or hard chrome finishes.
• UNCOMMON CORROSION RESISTANCE to today’s harsh coolant environments.

Electroless nickel plating available on all Sopko adapters at additional cost.
*Balancing style adapter.

24

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Standard Taper Wheel Adapters
With 3/32” Keyway in Small End of Taper.*
FOR GRINDING MACHINES MANUFACTURED BY UNISON CORP., FERNDALE, MI.
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.

Standard taper wheel adapters can be made with the 3/32" keyway in the taper.
List above is stocked product only.
* NOTE: The keyway is parallel to the centerline of the adapter.
**Balancing style adapter. See page 12 and 13 for other balancing style adapters.

26

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Standard Taper Wheel Adapters
With 3/32” Keyway in Small End of Taper.*
FOR GRINDING MACHINES MANUFACTURED BY UNISON CORP., FERNDALE, MI.
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
FOR 1.250” ID WHEELS.

Standard taper wheel adapters can be made with the 3/32" keyway in the taper.
List above is stocked product only.
* NOTE: The keyway is parallel to the centerline of the adapter.
**Balancing style adapter. See page 12 and 13 for other balancing style adapters.

27

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Tool & Cutter Grinders
Manufactured by Jungner.
2.000" TPF WITH .71" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.

Jungner 450 CNC tool and cutter grinder adapter.

SOPKO
CATALOG NO.

00690

00690
(Taper Side)

Jungner 450 CNC tool and cutter grinder adapter is furnished with a three piece steel balancing weight set 00848.

SOPKO
CATALOG NO.

50130

50130

Jungner 450 CNC tool and cutter grinder extended adapter.

SOPKO
CATALOG NO.

50353

50353

Jungner 450 CNC tool and cutter grinder collet chuck arbor.
Furnished with 4000 series nut and 1/4” collet.*
A 13/16” wrench flat on the body makes installation and removal easy.

SOPKO
CATALOG NO.

29911

* See page 97 for addtional 4000 series collets.

29911

47

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Flute Grinders Manufactured
by Hertlein Special Tool Co., Mt. Vernon, NY.
3.000" TPF WITH 1.63" DIAMETER AT LARGE END OF TAPER.
FOR 12.000" ID WHEELS.

Starting with a precision ground internal taper, this Sopko bolt-on flange balancing adapter offers today’s Hertlein CO-100 grinding professional the best in quality features. Two precisely ground flanges provide identical load-bearing surfaces for reliable grinding wheel lock and to maximize spindle driving torque. Made from pre-hardened alloy steel and finished with black oxide, the adapter is furnished with a bronze balancing weight set 00849.

01809

OPTIONAL SOCKET HEAD CAP SCREW SETS. *

WHEEL WIDTH
RANGE

SCREW SET
CATALOG NO.

SCREW
SIZE

SET
QTY

3/8 to 3/4

01809

3/8-16X1-3/4

8

1 to 1-1/4

01810

3/8-16X2-1/4

8

* Select proper length screw sets from tabulation to lock specific grinding wheel widths.

49

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Clausing 1020, 4020, Covel 35,
Covel 35B, Ingersoll Milling Co. and
Brown & Sharpe No. 5 Grinders.
1:5 TAPER RATIO, 3.500" TPF AND 3.000" TPF, WITH 1.03”, 1.31" AND 1.50"
DIAMETER AT LARGE END OF TAPER. FOR 1.25O”, 2.000" AND 3.000" ID WHEELS.

FOR CLAUSING
1020 GRINDERS.

SOPKO
CATALOG NO.

DIMENSIONS

A

C

00473

2

3-3/16

00474*

3

4-3/16

00473

00474

* Balancing style adapter.

FOR CLAUSING 4020, COVEL 35, AND COVEL 35B GRINDERS.

SOPKO
CATALOG NO.

SOPKO
PART NO.

(Front Side)

00693

(Taper Side)

00693

17-17H

These shrouded adapters, for Brown & Sharpe No. 5 surface grinders and the Ingersoll Milling Machine grinders, feature a 3/4" deep shroud that surrounds the wheelhead spindle nose and provides optimum protection against contamination. Fully HEAT TREATED, you can expect years of performance and with standard features like PRECISION GROUND TAPERS, and CONCENTRICALLY GROUND AND SQUARE surfaces, you’re assured of optimum cutting conditions too.

(Front Side)

00182

(Taper Side)

SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS

D

H

00182

23-1569

2-16LH

2.000

00183*

25-1569

3-16LH

3.000

* Most popular.

53

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Kent and Norton Grinders.
11° 24' INC ANGLE TAPER AND 3.500" TPF WITH 1.02" AND 1.50" DIAMETER AT LARGE END OF TAPER. FOR 1.250" AND 3.000" ID WHEELS.

The 05255 KENT BALANCING ADAPTER is furnished complete with a three piece bronze weight set 00835. Note*, some Kent grinders feature a 3.000" TPF with 1.00" diameter at the large end of taper.

SOPKO
CATALOG NO.

05255

05255

*See standard taper (3.000” TPF) adapters on page 4 to 30.

The 00824 (WSG824) BALANCING ADAPTER FOR THE NORTON S-3 GRINDER will also fit the Worcester Surface Grinder and the Warner and Swasey 8x24 grinder. The adapter is furnished complete with a three piece steel balancing weight set 00836.

(Front Side)

00824

(Taper Side)

SOPKO
CATALOG NO.

SOPKO
PART NO.

00824

WSG824

54

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Jones & Shipman Grinders.
15° INC ANGLE TAPER AND 3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.

Jones & Shipman 540 and 1400 series surface grinder adapters feature a 15° INC** high quality PRECISION GROUND TAPER for exceptional spindle engagement. Added value is achieved with CONCENTRICALLY GROUND AND SQUARE SURFACES along with THREAD GROUND OD threads to optimize cutting conditions and prolong wheel life. All adapter hubs are CARBURIZED AND HARDENED for durability.

05314

SOPKO
CATALOG NO.

DIMENSIONS

A

B

C

T

50136

1/4 to 3/4

2-1/4

1-7/8

15° INC **

50137

1/4 to 1/2

2-1/4

1-3/4

15° INC **

50111

1/2

3

1-3/4

15° INC **

05314

1/4 to 1/2

2-1/4

1-3/4

3.000 *

* Any 3.000" TPF, 1.00" LE adapter can be altered to taper length of 1-3/16”.
** Europe and Canada only.

Now you can protect the wheelhead spindle from the harsh realities of heat, swarf, and high pressure coolants with these quality Jones & Shipman 540 and 1400 series shrouded adapters. From taper to finish Sopko has designed these shrouded adapters for performance with standard features like:

• High Quality Internal Tapers.

• Thread Ground OD threads.

• Heat Treated Component Parts.

• Concentric and Square Ground Surfaces.

• Black Oxide finish.

SOPKO
CATALOG NO.

00647†

00907

00647

** Europe and Canada only.
† Includes three piece bronze balancing weight set 00861.

56

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Jones & Shipman Grinders.
FOR 13° 43’ 08” INC ANGLE TAPER* AND 2" STRAIGHT BORE WITH 1.605" DIAMETER AT
LARGE END OF TAPER.  FOR 5.000" ID WHEELS.

A tradition of quality manufacturing makes this Jones and Shipman series 1076 straight bore bolt-on flange balancing adapter an outstanding value. Two precison ground surfaces provide incomparable rigidity, and identical load bearing surfaces for the positive wheel lock and spindle driving torque that optimum surface finishes require. Manufactured from pre-heat treated alloy steel, the adapter is furnished with a three piece steel balancing weight set 00859, three 5/16-18RH x 1/2" SHCS 05941 flange bolts.

SOPKO
CATALOG NO.

01195

01195

(Front Side)

This premium quality Jones & Shipman series 1310 universal cylindrical grinder balancing adapter features the highest quality 13° 43’ 08” INC angle internal taper for precise spindle mounting and pre-heat treated hubs and nuts for strength and long life. Precision ground surfaces and thread ground threads provide unsurpassed wheel mounting parallelism for workpiece low-micro finishes. Adapter furnished with three piece bronze balancing weight set 00861.

SOPKO
CATALOG NO.

01836

01836
(Taper Side)

*Europe and Canada only.

57

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Okamoto DX Series Grinders.
3.000" TPF AND 1:5 TAPER RATIO WITH 1.00" AND 1.75" DIAMETER AT LARGE END OF TAPER. FOR 1.250" AND 5.000" ID WHEELS.

59

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Pope Style Wheel Adapters.*
3.000” TPF and 4.500” TPF WITH 1.00" AND .87" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.

Balancing, non-balancing, and shrouded type adapters are available for Pope Precision spindles. Made from 32 Rc alloy steel, these Pope style adapters feature concentric and square ground surfaces for optimum surface finishes. Thread ground OD threads assure safe, square wheel locking conditions and precisely ground internal tapers offer reliable spindle engagement.

SOPKO
CATALOG NO.

POPE
PART NO.

DIMENSIONS

A

D

E

00534

WS-100-1

1/4 to 3/4

1-1/4-16LH

-

00535

WS-100-2

1/4 to 3/4

1-1/4-16RH

-

00536

-

1/4 to 3/4

1-1/4-16LH

3/16

00537

-

1/4 to 3/4

1-1/4-16RH

3/16

00534

SOPKO
CATALOG NO.

DIMENSIONS

A

D

E

00529

1/8 to 5/8

1-1/4-16LH

3/16

00530

1/8 to 5/8

1-1/4-16RH

3/16

00531

1/4 to 5/8

1-1/4-16RH

1/8

00532

1/8 to 5/8

1-1/4-16LH

-

00533

1/8 to 5/8

1-1/4-16RH

-

00529

SOPKO
CATALOG NO.

POPE
PART NO.

DIMENSIONS

A

D

E

00542

WS-330-1

1/4 to 1

1-1/4-16LH

-

00543

WS-330-2

3/4 to 1

1-1/4-16RH

-

00544

-

3/4 to 1

1-1/4-16LH

3/16

00545

-

3/4 to 1

1-1/4-16RH

3/16

00827

Set of three hex weights for 00542, 00543, 00544, and 00545 balancing adapters.

00542

SOPKO
CATALOG NO.

DIMENSIONS

A

D

E

00546

5/8 to 1-1/4

1-1/4-16RH

1/8

00538

5/8 to 1-1/4

1-1/4-16LH

3/16

00539

5/8 to 1-1/4

1-1/4-16RH

3/16

00540

5/8 to 1-1/4

1-1/4-16LH

-

00541

5/8 to 1-1/4

1-1/4-16RH

-

* Lock ring 04278 is not included with any adapter listed on this page.

00538

60

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Large Taper Wheel Adapters for Larger Grinders.
3.000" TPF WITH 1.25” AND 1.50" DIAMETER AT LARGE END OF TAPER.
FOR 2.000", 3.000", 4.000”, AND 5.000” ID WHEELS.

These high performance, premium quality, balancing and non-balancing adapters are in a class by themselves. They feature the highest quality internal taper for precision spindle mounting, and pre-heat treated hubs and nuts for maximum strength, reliability, and long life. Precision ground surfaces and thread ground external threads provide unsurpassed wheel mounting parallelism for workpiece low-micro finishes.

FIG. 1

FIG. 2

00830

01312
(Front Side)

01316
(Taper Side)

SOPKO
CATALOG NO.

FIG.

DIMENSIONS

A

B

C

D

E

G

H

01312

1

5/8 to 1

3-1/2

2

2-18RH

1/4

1.25

2.000

01313

2

1/2 to 1

2-5/8

2-16RH

1/4

1.25

2.000

01316

2

1/2 to 1

4-1/4

2-3/4

3-16RH

1/4

1.25

3.000

01317

2

1/2 to 1

4-1/4

2-3/4

3-16LH

1/4

1.25

3.000

01318

2

3/4 to 2

5

3-3/8

3-16LH

-

1.50

3.000

01319

2

3/4 to 2

5

3-3/8

3-16RH

-

1.50

3.000

01320

2

1

6

3-3/8

4-16LH

-

1.50

4.000

01321

2

1

6

3-3/8

4-16RH

-

1.50

4.000

01322

2

3/4 to 2

7

3-3/8

5-16LH

-

1.50

5.000

01323

2

3/4 to 2

7

3-3/8

5-16RH

-

1.50

5.000

00838

Three piece bronze balancing weight set for
01318, 01319, 01320, 01321, 01322, 01323

00830

Three piece bronze balancing weight set for 01312, 01316, 01317.

00832

Three piece bronze balancing weight set for 01313.

All balancing style adapters include the three piece bronze balancing weight set.
See page 12 and 13 for standard taper balancing adapters.

65

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Large Taper Wheel Adapters for Larger Grinders.
3.000" TPF WITH 1.62" AND 2.25" DIAMETER AT LARGE END OF TAPER.
FOR 2.000”, 3.000", 4.000", AND 5.000" ID WHEELS.

These high performance, premium quality, balancing and non-balancing adapters are in a class by themselves. They feature the highest quality internal taper for precision spindle mounting, and pre-heat treated hubs and nuts for maximum strength, reliability, and long life. Precision ground surfaces and thread ground external threads provide unsurpassed wheel mounting parallelism for workpiece low-micro finishes.

FIG. 1

FIG. 2

00831

01337

SOPKO
CATALOG NO.

FIG.

DIMENSIONS

A

B

C

D

E

G

H

50328

2

1 to 1-1/2

5

3-1/4

3-16LH

1/4

1.62

3.000

01330

2

1-1/4 to 2

5

3-9/16

3-16LH

1/4

1.62

3.000

01324

2

1-1/4 to 2

5

3-9/16

3-16RH

1/4

1.62

3.000

01325

1

1-1/4 to 2

5

3-9/16

2-16LH

1/4

1.62

2.000

01326

1

1-1/4 to 2

5

3-3/8

3-16RH

1/4

1.62

3.000

01327

2

3/4 to 2

5

3-3/8

3-16LH

-

1.62

3.000

01328

2

3/4 to 2

5

3-16RH

-

1.62

3.000

01329

1

1-1/4 to 2

5

3-9/16

3-16RH

1/4

1.62

3.000

01332 *

2

1-1/4 to 2

7

3-9/16

3-16LH

1/4

1.62

3.000

01331 *

2

1-1/4 to 2

7

3-9/16

3-16RH

1/4

1.62

3.000

01333

2

3/4 to 2

6

3-3/8

4-16LH

-

1.62

4.000

01334

2

3/4 to 2

6

3-3/8

4-16RH

-

1.62

4.000

01335

2

3/4 to 2

7

3-3/8

5-16LH

-

1.62

5.000

01336

2

3/4 to 2

7

3-3/8

5-16RH

-

1.62

5.000

01337

2

1 to 2-1/2

5

4-1/4

3-16RH

1/4

2.25

3.000

01338

2

1 to 2-1/2

5

4-1/4

3-16LH

1/4

2.25

3.000

01339 *

2

1 to 2-1/2

7

4-1/4

3-16RH

1/4

2.25

3.000

01340 *

2

1 to 2-1/2

7

4-1/4

3-16LH

1/4

2.25

3.000

00831

Three piece bronze balancing weight set for
01324, 01330, 01331, 01332, 01337, 01338, 01339, 01340.

00834

Three piece bronze balancing weight set for 01326.

All balancing style adapters include the three piece bronze balancing weight set.
See page 12 and 13 for standard taper balancing adapters.
* 5" diameter nut.

66

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Large Taper Bolt-On Flange Wheel Adapters
for Larger Grinders.
3.000” TPF WITH 1.62” AND 2.25” DIAMETER AT LARGE END OF TAPER.
FOR 5.000” AND 8.000” ID WHEELS.

The Sopko commitment to quality makes these bolt-on flange balancing adapters, for larger grinders, an outstanding value. Two precision ground surfaces provide incomparable rigidity, and identical load bearing surfaces for the positive wheel lock and spindle driving torque that optimum surface finishes require. Manufactured from pre-heat treated alloy steel, Sopko bolt-on flange balancing adapters are safe to use.

FIG. 1

FIG. 2

01342

SOPKO
CATALOG NO.

FIG.

DIMENSIONS

SNAP
RING

A

B

C

D*

F

G

H

01341

1

3/4 to 1-1/2

7

2-9/16

3/4-16

3-1/2

1.62

5.000

04248

01357

1

1 to 2-1/2

7

3-9/16

1-1/8-12

3-1/2

2.25

5.000

04358

01342

2

3/4 to 1-3/4

7

2-13/16

3/4-16

3-5/8

1.62

5.000

01830

01343

2

1 to 2-1/2

7

3-9/16

1-1/8-12

3-5/8

2.25

5.000

01830

01344

2

1-3/4 to 3

10

4-1/16

1-1/8-12

4

2.25

8.000

01830

OPTIONAL SOCKET HEAD CAP SCREW SETS

ADAPTER   

WHEEL WIDTH
RANGE

SCREW SET
CATALOG NO.

SCREW
SIZE

SET
QTY

01341

3/4 to 1

01795

3/8-16X1-1/4

4

01797

00828

1-1/4 to 1-1/2

01796

3/8-16X1-3/4

4

3/4 to 1

01795

3/8-16X1-1/4

4

01342

1-1/4 to 1-1/2

01796

3/8-16X1-3/4

4

1-1/2 to 1-3/4

01797

3/8-16X2-1/4

4

1 to 1-1/2

01798

3/8-16X1-1/2

4

01343

1-3/4 to 2

01797

3/8-16X2-1/4

4

01357

2-1/4 to 2-1/2

01799

3/8-16X2-3/4

4

1-3/4 to 2

01797

3/8-16X2-1/4

4

01344

01799

3/8-16X2-3/4

4

2-3/4 to 3

01800

3/8-16X3-1/4

4

00828

Three piece bronze balancing weight set for 01342 and 01343.

00826

Three piece bronze balancing weight set for 01344.

All balancing style adapters include the three piece bronze balancing weight set.
See page 12 and 13 for standard taper balancing adapters.
*See page 80 for optional captive spindle locking nuts.
Select proper length screw sets from tabulation to lock specific grinding wheel widths.
Manufactured with snap ring groove. Snap ring not included.

67

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Large Taper Bolt-On Flange Balancing Wheel
Adapters for Larger Grinders.
3.000" TPF WITH 1.62" AND 2.25" DIAMETER AT LARGE END OF TAPER.
FOR 3.000" AND 5.000" ID WHEELS.

FIG. 1

FIG. 2

01812

00839

01353
(Front Side)

01351
(Taper Side)

SOPKO
CATALOG NO.

FIG.

DIMENSIONS

A

B

C

H

01351*†

1

1 to 1-1/2

7

3

5.000

01353*

1

1

4-15/16

2-1/2

3.000

01355**•

2

2-1/4 to 3

7

5-1/2

5.000

OPTIONAL SOCKET HEAD CAP SCREW SETS.

ADAPTER

WHEEL WIDTH
RANGE

SCREW SET
CATALOG NO.

SCREW SIZE

SET
QTY

01351

1 to 1-1/4

01812

5/16-18X2

6

1-1/2

01813

5/16-18X2-1/2

6

01353

3/4 to 1

01814

1/4-20X2

4

01355

01806

5/16-18X2

6

2-3/4 to 3

01807

5/16-18X2-1/2

6

01865

Three piece bronze balancing weight set for 01353.

00839

Three piece bronze balancing weight set for 01351.

00840

Three piece bronze balancing weight set for 01355.

All balancing style adapters include the three piece bronze balancing weight set.
See page 12 and 13 for standard taper balancing adapters.
* Price does not include optional nut 3/4-16LH 05020, 3/4-16RH 05021 on page 76 or snap ring 04291.
** Price does not include optional nut 7/8-14LH 05116, 7/8-14RH 05117 on page 76 or snap ring 04305.
Manufactured with snap ring groove. Snap ring not included.
Select proper length screw sets from tabulation to lock specific grinding wheel widths.
† Pope, Setco, and Whitnon.
• Setco

68

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Large Taper Bolt-On Flange Wheel
Adapters for Larger Grinders.
3.000" TPF WITH 2.62", 3.00" AND 3.75" DIAMETER AT LARGE END OF TAPER.
FOR 5.000", 8.000" AND 12.000" ID WHEELS.

The Sopko commitment to quality makes these bolt-on flange balancing adapters, for larger grinders, an outstanding value. Two precision ground surfaces provide incomparable rigidity, and identical load bearing surfaces for the positive wheel lock and spindle driving torque that optimum surface finishes require. Manufactured from pre-heat treated alloy steel, Sopko bolt-on flange balancing adapters are safe to use. And of course, the high quality internal taper is unsurpassed for precision spindle mounting.

01801

00829

01345

SOPKO
CATALOG NO.

DIMENSIONS

SNAP
RING

A

B

C

D*

E

F

G

H

01345

1-1/2 to 2-3/4

7

4-3/16

1-1/2-12

1/4

3-5/8

2.62

5.000

01830

01346

1-3/4 to 3

14

4-5/16

1-1/2-12

1/4

5-1/2

2.62

12.000

01830

01347

1-3/4 to 3

7

4-11/16

1-1/2-12

1/4

3-5/8

3.00

5.000

01830

01348

1-3/4 to 3

10

4-5/16

1-1/2-12

1/4

5-1/2

3.00

8.000

01830

01349

1-3/4 to 3

14

4-5/16

1-1/2-12

1/4

5-1/2

3.00

12.000

01830

01350

2-1/4 to 4

10

5-1/2

2-1/4-12

3/8

5-1/2

3.75

8.000

04331

OPTIONAL SOCKET HEAD CAP SCREW SETS

ADAPTER

WHEEL WIDTH
RANGE

SCREW SET
CATALOG NO.

SET
QTY

01345

1-1/2 to 2

01801

3/8-16X2-1/2

4

2-1/4 to 2-3/4

01800

3/8-16X3-1/4

4

01346

1-3/4 to 2-1/4

01811

3/8-16X3

6

01347

2-1/2 to 3

01802

3/8-16X3-1/2

4

01349

6

01348

1-3/4 to 2-1/4

01803

1/2-13X3

6

01804

1/2-13X3-1/2

6

2-1/4 to 2-3/4

01805

1/2-13X2-1/2

6

01350

3 to 3-1/2

01806

1/2-13X3-1/4

6

4

01807

1/2-13X4

6

00829

Three piece bronze balancing weight set for 01346 and 01349.

00826

Three piece bronze balancing weight set for 01345, 01347, 01348, and 01350.

All balancing style adapters include the three piece bronze balancing weight set.
See page 12 and 13 for standard taper balancing adapters.
* See page 80 for optional captive spindle locking nuts.
Select proper length screw sets from tabulation to lock specific grinding wheel widths.
Manufactured with snap ring groove. Snap ring not included.

69

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Heald Sleeve Style Internal
Grinding Spindles.
2.000" TPF AND 3.000" TPF WITH .60", .93", 1.25", 1.63", 2.00", AND 2.25"
DIAMETER AT LARGE END OF TAPER.
FOR 0.875", 1.250", 1.500", 2.500", 2.750", AND 3.000" ID WHEELS.

00653

00654

SOPKO
CATALOG NO.

HEALD
PART NO.

DIMENSIONS

WHEEL
HEAD
SERIES

A

C

00653

H405-500

1/2

1-11/16

405

00654

H405-1000

1

2-3/16

405

50065