Wheel Adapters for Grinding Machines Manufactured by ANCA, Victoria, Australia.
3.500" TPF WITH 1.02", AND 1.38" DIAMETER AT LARGE END OF TAPER.  FOR 1.250" AND 2.000" ID WHEELS.

 


Sopko quality Anca FASTGRIND adapters are made for the operator expecting the highest standard of performance required by today's fast set-up times and short production runs. Sopko assures this standard with quality features like PRECISION GROUND TAPERS for reliable spindle mating and CONCENTRICALLY GROUND AND SQUARE surfaces to optimize cutting conditions and prolong wheel life. Hub OD threads are THREAD GROUND to assure safe, square wheel locking conditions and you can expect years of performance from these FASTGRIND adapters because Sopko HEAT TREATS every one. Every Anca adapter is furnished complete with a spindle mounting bolt, lock washer and recessed washer.
 

SOPKO CATALOG NO. FIG. ANCA PART NO.   DIMENSIONS    
A B C D G H MACHINE
00625 1 AT902-0-00-5026 1-1/8 to1-1/4 3 2-3/16 2-16RH 1.38 2.000 TG7/DM7
00626 1 AT902-0-00-5027 1-7/8 to 2 3 2-31/32 2-16RH 1.38 2.000 TG7/DM7
50063   1 -  2-5/8 3 3-9/16 2-16RH 1.38 2.000 TG7/DM7
00823 1 AT937-0-00-1009 3-1/4 3 4-1/8 2-16RH 1.38 2.000 TG7/DM7
00627  1 - 3-3/8 to 3-1/2 3 4-3/8 2-16RH 1.38 2.000 TG7/DM7
00822 1 AT937-0-00-1010 4-3/8 3 5-5/16 2-16RH  1.38 2.000 TG7/DM7
50163 2 AT902-0-01-5037  2 2  4.613 1-1/4-16RH 1.38 1.250 TG7/DM7
00628 1 AT913-0-00-1024 1-1/8 1-31/32 1-31/32 1-1/4-16RH 1.02 1.250 MG7/RG7
00629 1 AT913-0-00-1025 1-7/16 to 1-1/2 1-31/32 2-3/8 1-1/4-16RH  1.02 1.250 MG7/RG7
50186 1 - 2-1/8 1-31/32 3-1/32 1-1/4-16RH  1.02 1.250 MG7/RG7
50187 1 - 2-5/8 1-31/32 3-1/2 1-1/4-16RH 1.02 1.250 MG7/RG7
50188  1 - 3-1/8 1-31/32  4 1-1/4-16RH 1.02 1.250 MG7/RG7
50350* 1 - 2-1/2 3 3-7/16 2-16RH 1.02 2.000 MG7/RG7
00496** 1 AT913-2-00-1010  1-1/2 to 1-3/4 1-31/32   2-5/8 1-1/4-16RH 1.02 1.250 RGX
00521*** 1 AT913-2-00-1020 2 to 2-1/2 1-31/32   3-19/64 1-1/4-16RH 1.02  1.250 RGX
00398*** 1 AT913-2-00-1030 2-5/8 to 3 1-31/32 3-13/16 1-1/4-16RH 1.02 1.250 RGX
00879***  1  AT913-2-00-1040 3 to 3-3/8 1-31/32 4-7/32 1-1/4-16RH 1.02 1.250 RGX
* Allows use of 2" ID wheels on MG7/RG7 machines.
** Includes two 5MM spacers 01305, one 10MM spacer 01310, and bi-directional nut 00067.
*** Includes two 5MM spacers 01305, two 10MM spacers 01310, and bi-directional nut 00067.
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

 

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

44

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888