Cincinnati Taper Collet Chuck Extension Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.  FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.  SAVE BOTH THE EXPENSE AND THE SET-UP TIME OF A HIGH SPEED ATTACHMENT.

 


THERE IS A DIFFERENCE WITH SOPKO!

  • Made from superior QUALITY alloy steel and heat treated for optimum performance.

  • Tapers are PRECISION GROUND at both ends of the collet chuck extension adapter.

  • The extension body is GROUND for concentricity.

  • The hardened collet nut has a precision internal taper that seats PRECISELY against the collet nose-angle to insure PROPER ENGAGEMENT of the grinding wheel shank.

Ideal for older Cincinnati flat belt center drive grinder spindles. The set includes a 1/4" 6000 series collet 59108, collet nut 59125, and floating nut spacer 00662 (FN-1). A 1-1/4" wrench flat on the body makes installation and removal easy. The hex spindle nut must be selected separately to suit your machine.

SOPKO
CATALOG  NO.
SOPKO PART NO.
00757 C200-CCEA
 



6000 SERIES COLLETS*
RANGE 1/8" TO 1/2"

SOPKO
CATALOG NO.

COLLET CAPACITY
59100 1/8
59102 5/32
59104 3/16
59106 7/32
59108 1/4
59112 5/16
59116 3/8
59120 7/16
59124 1/2
59125 NUT
*Additional collet sizes are available on special order.

Ideal for newer style Cincinnati grinders having direct motorized and timing belt driven spindles with a 1/8" keyway in the taper. The set includes a 1/4" 6000 series collet 59108, collet nut 59125, floating bolt spacer 01244 (FN-2), and socket head cap screw 01025 (FN-B). The bolt is dropped into the extension and through the round floating bolt spacer. In this position the bolt acts as a draw thread to pull the collet chuck extension onto the spindle taper. A 1-1/4" wrench flat on the body makes installation and removal easy.

SOPKO
CATALOG  NO.
SOPKO PART NO.
00679 C200-CCEA-KW

Standard taper (3.000" TPF) collet chuck extension adapters on page 18.
*Additional collet sizes are available on special order.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

38

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Taper Adapters for Cincinnati Monoset Grinders.
30° INC ANGLE WITH .75" DIAMETER AT LARGE END OF TAPER.
FOR .750" AND 1.250" ID WHEELS.


00111 00110

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A B H

00110 S110 1/4 to 1/2 1-3/8 3/4
00111 S111 1/4 to 1/2 2 1-1/4
50122 - 3/4 2 1-1/4


00099 00098

Sopko LONG EXTENDED MONOSET cutter and tool grinder adapters provide added clearance by locating the grinding wheel further from the spindle nose. They are ideal for applications requiring an operator to reach across an obstruction.


SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A B H

00099 SE110 1/4 to 1/2 1-3/8 3/4
00098 SE111 1/4 to 1/2 2 1-1/4


THERE IS A DIFFERENCE WITH SOPKO!

  • Monoset Collet Chuck Quills are GROUND all over for CONCENTRICITY.

  • PRECISION TAPERS are GROUND at both ends.

  • Made from superior QUALITY alloy steel and HEAT TREATED for optimum performance.

  • The hardened collet nut has a PRECISION INTERNAL TAPER that seats PRECISELY against the collet nose angle to ensure PROPER ENGAGEMENT of the grinding wheel shank.

  • Comes complete with 1/8" 20004 and 1/4" 20012 series 4000 collets, and collet nut 20013.*

*See page 97 for additional Series 4000 collet sizes.

00097
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

42

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888