Standard Taper Reversible Wheel Adapters.
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.  DESIGNED FOR 1.250" ID DIAMOND, CBN, AND VITRIFIED WHEELS.

THERE IS A DIFFERENCE WITH SOPKO REVERSIBLE ADAPTERS!

• Formed wheels are used either way without redressing.

• Can be REVERSED without DISMOUNTING the wheel for prolonged square corner life of diamond wheels.

• Sopko reversible wheel adapters make it possible to use the same dressed angle for
  BOTH RIGHT AND LEFT GROUND TOOL BITS.

• EASY TO USE-Just remove the adapter from the spindle nose and REMOUNT in the reverse direction.

• SAFE TO USE-Sopko reversible wheel adapters are manufactured with a double-taper and are securely locked against loosening by the wheel rotation.

• Manufactured from quality steel to withstand the rigors of daily use, then HARDENED and GROUND.
   

For use on all spindles having a 3.000" TPF with 1.00" diameter at large end of taper.  Including: Boyar-Schultz, Bridgeport, Brown & Sharpe, DoAll, Excello, Foote Burt-Hammond, Harig, Norton, Parker Majestic, Pope, Reid, Sanford, Setco, Taft Pierce, and Whitnon.

A precision ground double-taper and removable bushing make wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle. LH thread is standard.

SOPKO  CATALOG NO.	SOPKO PART NO.	DIMENSIONS
		A	B	D
00222	222RWA	1/4 to 1/2	2-1/4	1-1/4-16LH
00255	222RWA-R	1/4 to 1/2	2-1/4	1-1/4-16RH
00256	4.5-2RWA	0 to 1/2	4-1/2	1-1/4-16RH
00022	22-W	Replacement tapered bushing.

20

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Cincinnati Taper Reversible Wheel Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.  DESIGNED FOR 1.250" ID DIAMOND, CBN, AND VITRIFIED WHEELS.

THERE IS A DIFFERENCE WITH SOPKO REVERSIBLE ADAPTERS!

• Formed wheels are used either way, without redressing.

• Can be REVERSED without DISMOUNTING the wheel for prolonged square corner life of diamond wheels.

• Sopko reversible wheel adapters make it possible to use the same dressed angle for BOTH RIGHT AND LEFT GROUND TOOL BITS.

• EASY TO USE-Just remove the adapter from the spindle nose and REMOUNT in the reverse direction.

• SAFE TO USE-Sopko reversible wheel adapters are manufactured with a double-taper, and are securely locked against loosening by the wheel rotation. Manufactured from quality steel, then HARDENED AND GROUND to withstand the rigors of daily use.

CINCINNATI TAPER "OLD STYLE" REVERSIBLE WHEEL ADAPTER.
A precision ground double-taper makes wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle. Designed for the older Cincinnati flat belt center drive spindles, the adapter comes complete with a 1/2-13LH 06074 and a 1/2-13RH 06073 slotted spindle nut.

SOPKO CATALOG NO.	SOPKO PART NO.	DIMENSIONS
		A	D
00122	122RWA	1/4 to 1/2	1-1/4-16RH

35

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Wickman OPG and
Sheffield Micro-Form Grinders.
3.500" TPF WITH .56" DIAMETER AT LARGE END OF TAPER.
FOR .750" AND 1.250" ID WHEELS.

Designed for the Wickman OPG Grinder and the Sheffield 121, 122, and 122A Micro-Form Grinder, these adapters feature a one piece hub design to distribute mounting pressure away from the bore, the weakest part of the grinding wheel. The inherent rigidity of one piece design and the precision ground flanges provide identical radial load bearing surfaces for positive wheel lock. For optimum micro finishes, all surfaces have been ground concentric and square. A precision taper makes spindle mounting reliable, and the heat treated hub and nut assures long-life and safe operation. Spindle uses a 5/16-24LH spindle nut 05335 (not furnished).

FIG. 1

FIG. 2

00676

00677

00678

SOPKO
CATALOG NO.

FIG.

SOPKO
PART NO.

DIMENSIONS

A

B

C

D

00676*†

1

A-12930-3/4

1/2

1-7/8

1

11/16-24LH

00677*

2

A-12930-2

1/2

2

1-1/32

1-1/4-16LH

00678*

2

A-12930-3-1/4

1/16 to 1/4

3-1/4

1

1-1/4-16LH

See page 74 for accessory flanges.
*Older style Wickman grinders.
†With 11/16-24LH adapter nut 04284.

This precision ground double-taper reversible adapter is designed for the Wickman OPG Grinder and the Sheffield 121, 122, and 122A Micro-Form Grinder. The adapter is furnished with a 5/16-24LH special tapered hex spindle nut 05105.

SOPKO
CATALOG NO.

50074

50074

62

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Wickman OPG and
Sheffield Micro-Form Grinders.
10° INC ANGLE TAPER WITH .69" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.

For newer style Wickman Grinders.

01020

SOPKO
CATALOG NO.

SOPKO
PART NO.

01020

S102

01021 (S102RWA) WICKMAN REVERSIBLE WHEEL ADAPTER. Ideal for diamond wheel use, this adapter has a precision ground double-taper to make wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle taper.

(Front Side)

01021

(Rear Side)

SOPKO
CATALOG NO.

SOPKO
PART NO.

01021*

S102RWA

* Newer style Wickman grinders.

63

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapters for Wasino Grinders
(Older Style Machines).
15° INC ANGLE TAPER WITH .71" AND .66" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.

(Front Side)

00967

(Taper Side)

SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS

G

00967*

S108

.66

00968**

S109

.71

*Designed for the GLS-125 grinder.
**Designed for the GLS-125A grinder.

(Front Side)

00969

(Taper Side)

SOPKO
CATALOG NO.

SOPKO
PART NO.

00969**

S109TI

**Designed for the GLS-125A grinder.

The WASINO REVERSIBLE WHEEL ADAPTER features a precision ground double-taper to make wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle taper.

(Front Side)

00970

(Taper Side)

SOPKO
CATALOG NO.

SOPKO
PART NO.

00970**

S109RWA

**Designed for the GLS-125A grinder.

64

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888