| Optional
Accessories for 01247 Cartridge Insert Spindle. WRENCH, COLLET CHUCK QUILLS, OD GRINDING INSERT, AND PULLEYS. |
|
| 00583 (583) 3/8" Square wrench. |  |
| 29702* Collet chuck quill
for 1/16" to 1/4" dia. shanks. Furnished with 4000 series nut, 1/8", and 1/4" collets. |
 |
| 29704* Collet chuck quill
for 1/8" to 3/8" dia. shanks. Furnished with 5000 series collet nut only. |
 |
| 00144 (TX) Insert for OD
grinding, 5" max dia. wheels. Comes with 2 wheel collars and 3 general purpose wheels. |
 |
| 00297 (671-0225) 0.735" Crown face flat belt pulley. |  |
| 00036 (671-0226) 0.985" Crown face flat belt pulley. |  |
| 00166 (671-0227) 1.235" Crown face flat belt pulley. |  |
| 00642 (671-0228) 1.985" Crown face flat belt pulley. |  |
| 00507 (671-0229) 2.975" Crown face flat belt pulley. |  |
| 00484 (671-0230) 3.985" Crown face flat belt pulley. |  |
| 00461 (671-0231) 5.000" Crown face flat belt pulley. |  |
| * Jarno taper quill extensions
available, ask for brochure No. 49948. Flat belts available in most sizes, ask for brochure No. 49890. |
|
ROTATION: RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation. |
 |
CAUTION! Always Wear Safety Goggles When Griding. |
|
103 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
||
| Optional Accessories for Sopko High Speed Attachment. |
|||||||||
| The Sopko High Speed Attachment provides higher speeds than would ordinarily be obtained with other spindles. Capable of being mounted in any position about its axis, the unit attaches quickly and easily to the spindle housing and is held securely by two clamping screws. The drive pulley assembly is mounted and balanced on a wheel adapter 00200. Made from quality alloy steel, heat treated for strength, and precisely ground to maximize surface contact, the variety of eccentric bushings increases the unit’s versatility. And Sopko quality does not stop with the High Speed Attachment, it extends right into the most varied selection of grinding quills available anywhere. | |||||||||
|
|||||||||
| Optional accessories:* 29707 625 Jarno LH collet chuck quill furnished with 4000 series nut, 1/8”, and 1/4” collets. 29709 625 Jarno LH collet chuck quill furnished with 5000 series collet nut only. 08010 3-1/8" Eccentric bushing for Boyar-Schultz No. 6 x 12. 08009 3-1/4" Eccentric bushing for Brown & Sharpe No. 2. 08011 80MM Eccentric bushing. |
|||||||||
| Maintain safe speeds, refer to grinding wheel manufacturers’ instructions and ANSI B7.1 or DIN 69170 safety standards. See page 97 for series 4000 and 5000 collets (specify size). *Grinding wheel not included. |
|||||||||
ROTATION: RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation. |
|
CAUTION! Always Wear Safety Goggles When Griding. |
|
109 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
||
