Optional Accessories for 01247 Cartridge Insert Spindle.


Optional Accessories for 01247 Cartridge Insert Spindle. WRENCH, COLLET CHUCK QUILLS, OD GRINDING INSERT, AND PULLEYS.


00583 (583) 3/8" Square wrench.

29702* Collet chuck quill for 1/16" to 1/4" dia. shanks. Furnished with 4000 series nut, 1/8", and 1/4" collets.

29704* Collet chuck quill for 1/8" to 3/8" dia. shanks. Furnished with 5000 series collet nut only.

00144 (TX) Insert for OD grinding, 5" max dia. wheels. Comes with 2 wheel collars and 3 general purpose wheels.

00297 (671-0225) 0.735" Crown face flat belt pulley.

00036 (671-0226) 0.985" Crown face flat belt pulley.

00166 (671-0227) 1.235" Crown face flat belt pulley.

00642 (671-0228) 1.985" Crown face flat belt pulley.

00507 (671-0229) 2.975" Crown face flat belt pulley.

00484 (671-0230) 3.985" Crown face flat belt pulley.

00461 (671-0231) 5.000" Crown face flat belt pulley.

* Jarno taper quill extensions available, ask for brochure No. 49948. Flat belts available in most sizes, ask for brochure No. 49890.

	ROTATION: RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation.		CAUTION! Always Wear Safety Goggles When Griding.
103	William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Sopko High Speed Attachment.
INCREASE THE USE OF YOUR SURFACE GRINDER.
USED ON HARIG, REID, K.O. LEE, PARKER MAJESTIC, AND MANY MORE.

08000

08000 Used to finish radii on dies or other parts requiring small contour grinding, this unit is perfect for the tool room, job shop, or any number of occasional use applications. Designed for long life and heavy use, the Sopko High Speed Attachment kit increases the productivity of your surface grinder. When attached, it’s like having an extra machine in the shop at only a fraction of the cost. The center distance between the surface grinder spindle and the attachment spindle is held to a minimum with our latest bracket design. The attachment spindle is shorter in length than competitive units, allowing maximum over-table use horizontally or vertically. The High Speed Attachment is furnished as a complete kit including all standard items listed below. Unit net weight 30.1 LB. Shipping weight 34 LB.

Standard unit includes:
08001	Bracket.
08002	3" Diameter eccentric bushing for Harig, Reid No. 2, K.O. Lee, Parker Majestic, Hammond No. 2, and others with 3” diameter spindles.
08003	17,500 RPM grease lubricated spindle with 1-3/16" diameter pulley.
08004	5-9/16" Diameter flat belt pulley.
00200	(200-1) Adapter. Pulley is mounted on the adapter and balanced.
10197	5/8" X 20-1/4" Sopko flat belt (2 pcs).
00630	(630) 11/16" Open end wrench for series 4000 collet chuck nut.
00631	(603A) 5/8" Open end wrench for collet chuck quill wrench flat.
00640	(604A) 3/4" Open end wrench for end of spindle.
08005	1/8" Short arm hex wrench.
08006	1/4" Short arm hex wrench.
35135	Spanner-socket wrench.
08007	Wooden storage box.
Maintain safe speeds, refer to grinding wheel manufacturers’ instructions and ANSI B7.1 or DIN 69170 safety standards.

	ROTATION: RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation.		CAUTION! Always Wear Safety Goggles When Griding.
108	William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888