Wheel Adapter Parts.

Wheel Adapter Parts.
Nuts.


00020	00186	00599

SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS

DESCRIPTIONS

00024

S-110NR

1-3/8

1/4

3/4-16RH

For S-110 Monoset adapter

05529

1-5/8

1/4

1-20LH

For 1" ID wheel extension

05530

1-5/8

1/4

1-20RH

For 1" ID wheel extension

00155

X-200-NL

1-3/4

1/4

1-1/4-16LH

For X-200-1 adapter

00185

X-200-NR

1-3/4

1/4

1-1/4-16RH

For X-200-2 adapter

00296

913-0-00-1006

1.85

.39

1-1/4-16RH

For ANCA MG7 series adapters

00067

50 MM (1.97”)

10 MM (0.39”)

1-1/4-16RH

For ANCA RGX adapters, has two #10-32 00939 nylon-tipped set screws on O.D.

04284

1-7/8

1/4

11/16-24LH

For Wickman adapter 00676, two #10-32
tapped holes in face

05113

1/4

3/4-16RH

For S-111 Monoset adapter

04276

5/16

1-1/4-16LH

For Wickman adapter 00677, 00678 & 50074, two #10-32
tapped holes in face

00145

9/32

1-1/4-16LH

For Wickman adapter 00677 with two #10-32
tapped holes in face.

00416

W-401-NL

2-1/8

5/16

1-1/4-16LH

For Pope adapters 00529 and 00532

00425

W-401-NR

2-1/8

5/16

1-1/4-16RH

For Pope adapters 00530, 00531, and 00533

00020

200-NL

2-1/4

5/16

1-1/4-16LH

00186

AN-200NL

2-1/4

5/16

1-1/4-16LH

Has two #10-32 00939 nylon-tipped set screws on O.D.

00187

AN-200NR

2-1/4

5/16

1-1/4-16RH

Has two #10-32 00939 nylon-tipped set screws on O.D.

00599 *

EN-200-NL

2-1/4

5/16

1-1/4-16LH

Electroless nickel plated

01238

SS-200-NL

2-1/4

5/16

1-1/4-16LH

Stainless steel

00021

200-NR

2-1/4

5/16

1-1/4-16RH

00796 *

EN-200-NR

2-1/4

5/16

1-1/4-16RH

Electroless nickel plated

01229

SS-200-NR

2-1/4

5/16

1-1/4-16RH

Stainless steel

04279

2-1/4

3/8

1-1/2-16LH

For Abrasive adapter 00813

00643

2-5/16

1/4

1-1/4-16RH

00682

2-3/8

5/16

1-1/4-16RH

00223

220-NL

2-7/16

3/8

1-1/4-16LH

00224

220-NR

2-7/16

3/8

1-1/4-16RH

01228 *

EN-220-NR

2-7/16

3/8

1-1/4-16RH

Electroless nickel plated

01243

EU230NL

5/16

1-1/4-16LH

For ball location adapter 00738 (has clearance angle on OD)

00273

230-NL

3/8

1-1/4-16LH

01110 *

EN-230-NL

3/8

1-1/4-16LH

Electroless nickel plated

00274

230-NR

3/8

1-1/4-16RH

00703 *

EN-230-NR

3/8

1-1/4-16RH

Electroless nickel plated

00156

96.5301.5001

3/8

2-16RH

For ANCA TG7 series adapters

04253

7/16

2-16LH

For Huffman adapters

04252

7/16

2-16RH

For Huffman adapters

* In stock, but Electroless nickel plating is available for all nuts at additional cost.

	ROTATION: RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation.		CAUTION! Always Wear Safety Goggles When Griding.
79	William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

Wheel Adapter Parts.
Nuts.


00285	04264

SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS

DESCRIPTIONS

00285

235-NL

3-1/2

3/8

1-1/4-16LH

00286

235-NR

3-1/2

3/8

1-1/4-16RH

04266

3-1/2

5/16

2-18RH

For large taper adapter 01312

05114

3-7/16

5/16

1-1/4-16LH

For Gallmeyer & Livingston adapters
00526, 00527, and 00528

05042

25-1569-1

4-1/8

1/2

3-16LH

For shrouded adapter 00183

05043

4-1/8

1/2

2-16LH

For shrouded adapter 00182

04260

4-1/4

7/16

2-18RH

For large taper balancing adapter 01313

04263

4-1/4

9/16

3-16LH

04265

4-1/4

9/16

3-16RH

04287

4-1/4

13/32

1-1/4-16LH

04288

4-1/4

13/32

1-1/4-16RH

04285

4-1/4

5/8

2-3/4-16RH

04262

4-1/2

7/16

3-16LH

For Clausing and Covel adapter 00693

04294

4-3/4

7/16

3-16LH

For Norton S-3 balancing adapter 00824

04267

4-3/4

1/2

3-16LH

04300

7/16

3-16LH

04270

7/16

3-16RH

For large taper adapter 01329, 01324

04264

9/16

3-16LH

For large taper balancing adapters
01330, 01338, 01332, and 01340

04261

9/16

3-16RH

For large taper balancing adapter 01337

This style nut, used to lock wheel adapters onto the spindle, and secured in the adapter with a snap-ring, is referred to as a CAPTIVE Spindle locking nut.


05108	05111

SOPKO
CATALOG NO.

DIMENSIONS

DESCRIPTIONS

05108

2-15/16

7/8

0.60

3/4-16RH

For adapter 01342

05115

2-15/16

1-1/8

0.81

1-1/8-12RH

For adapter 01341

05109

2-15/16

1-1/4

0.81

1-1/8-12RH

For adapter 01343

05110

2-15/16

1-5/8

0.81

1-1/8-12RH

For adapter 01344

05111

2-15/16

1-1/2

0.81

1-1/2-12RH

For adapters 01345,
01346, 01347, 01348, and 01349

05112

4-1/2

2-1/4

1.025

2-1/4-12RH

For adapter 01350

Electroless nickel plating is available for all nuts at additional cost.

	ROTATION: RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation.		CAUTION! Always Wear Safety Goggles When Griding.
80	William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888