Wheel Adapter Parts.
Nuts.

00020

00186

00599


SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS DESCRIPTIONS

A B D

00024

S-110NR 1-3/8 1/4 3/4-16RH For S-110 Monoset adapter

05529

- 1-5/8 1/4 1-20LH For 1" ID wheel extension

05530

- 1-5/8 1/4 1-20RH For 1" ID wheel extension

00155

X-200-NL 1-3/4 1/4 1-1/4-16LH For X-200-1 adapter

00185

X-200-NR 1-3/4 1/4 1-1/4-16RH For X-200-2 adapter

00296

913-0-00-1006 1.85 .39 1-1/4-16RH For ANCA MG7 series adapters

00067

- 50 MM (1.97) 10 MM (0.39) 1-1/4-16RH For ANCA RGX adapters, has two #10-32 00939 nylon-tipped set screws on O.D.

04284

- 1-7/8 1/4 11/16-24LH For Wickman adapter 00676, two #10-32
tapped holes in face

05113

- 2 1/4 3/4-16RH For S-111 Monoset adapter

04276

- 2 5/16 1-1/4-16LH For Wickman adapter 00677, 00678 & 50074, two #10-32
tapped holes in face

00145

- 2 9/32 1-1/4-16LH For Wickman adapter 00677 with two #10-32
tapped holes in face.

00416

W-401-NL 2-1/8 5/16 1-1/4-16LH For Pope adapters 00529 and 00532

00425

W-401-NR 2-1/8 5/16 1-1/4-16RH For Pope adapters 00530, 00531, and 00533

00020 200-NL 2-1/4 5/16 1-1/4-16LH
00186 AN-200NL 2-1/4 5/16 1-1/4-16LH Has two #10-32 00939 nylon-tipped set screws on O.D.
00187 AN-200NR 2-1/4 5/16 1-1/4-16RH Has two #10-32 00939 nylon-tipped set screws on O.D.
00599 * EN-200-NL 2-1/4 5/16 1-1/4-16LH Electroless nickel plated
01238 SS-200-NL 2-1/4 5/16 1-1/4-16LH Stainless steel
00021 200-NR 2-1/4 5/16 1-1/4-16RH
00796 *     EN-200-NR 2-1/4 5/16 1-1/4-16RH Electroless nickel plated
01229 SS-200-NR 2-1/4 5/16 1-1/4-16RH Stainless steel
04279 - 2-1/4 3/8 1-1/2-16LH For Abrasive adapter 00813

00643

- 2-5/16 1/4 1-1/4-16RH

00682

- 2-3/8 5/16 1-1/4-16RH

00223 220-NL 2-7/16 3/8 1-1/4-16LH
00224 220-NR 2-7/16 3/8 1-1/4-16RH
01228 * EN-220-NR 2-7/16 3/8 1-1/4-16RH Electroless nickel plated

01243 EU230NL 3 5/16 1-1/4-16LH For ball location adapter 00738 (has clearance angle on OD)
00273 230-NL 3 3/8 1-1/4-16LH
01110 * EN-230-NL 3 3/8 1-1/4-16LH Electroless nickel plated
00274 230-NR 3 3/8 1-1/4-16RH
00703 * EN-230-NR 3 3/8 1-1/4-16RH Electroless nickel plated
00156 96.5301.5001 3 3/8 2-16RH For ANCA TG7 series adapters
04253 - 3 7/16 2-16LH For Huffman adapters
04252 - 3 7/16 2-16RH For Huffman adapters

* In stock, but Electroless nickel plating is available for all nuts at additional cost.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

79

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888