Standard Taper Wheel Adapters.
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.  FOR 1.250" ID WHEELS.


00220 (220-1) is the standard replacement adapter for Bridgeport-Harig and Parker PM Majestic grinding machines using 7" diameter wheels.



 SOPKO
CATALOG NO. 
SOPKO PART NO. DIMENSIONS
D
00220 220-1 1-1/4-16LH
00221 220-2 1-1/4-16RH
Providing optimum protection against contamination to the wheelhead spindle nose, these high-quality SHROUDED ADAPTERS are designed for performance. Sopko assures this standard with quality features like PRECISION GROUND TAPERS and CONCENTRICALLY GROUND AND SQUARE surfaces to maximize cutting conditions and prolong wheel life. Hub OD threads are THREAD GROUND to assure safe, square wheel locking conditions and you can expect years of performance from these adapters because Sopko HEAT TREATS every one.



SOPKO CATALOG NO. SOPKO PART NO. DIMENSIONS
D
00180 2BY-LH 1-1/4-16LH
00181 2BY-RH 1-1/4-16RH

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

6

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Wheel Adapters for Abrasive (Gardner),
DeVlieg, and ELB Grinders.

2.972" TPF, 3.000" TPF, AND 11° 20' INC ANGLE TAPER WITH 1.12", 1.00", AND
.98" DIAMETER AT LARGE END OF TAPER. FOR 3.000" AND 1.250" ID WHEELS.


The 00813 ABRASIVE (GARDNER) No. 1-1/2, 10"x15" manual surface grinder adapter features a 13/16" deep shrouded design to keep contaminants away from the spindle.
To maximize cutting conditions and to prolong wheel life, Sopko provides PRECISION GROUND TAPERS, and CONCENTRIC AND SQUARE SURFACES. OD threads are GROUND and hubs and nuts are HEAT TREATED FOR STRENGTH.


SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS


A


00813

ABR 1-1/2

1/2 to 2


00813


The 00191 DEVLIEG MICRO-POINT GRINDER ADAPTER is designed for plate-mounted grinding wheels with the abrasive medium bonded to a steel wheel. Four 1/4-20 tapped holes, used to lock the wheel in place, are positioned on a 2" diameter center-line. Assembled with hub and 3/8" spacer, 1/4-20 screws are not included.


SOPKO
CATALOG NO.

SOPKO
PART NO.


00191

DV262


00191


For older ELB GRINDERS and new MIGHTY FREEPORT 618 GRINDERS.


00177


SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS


A

C


00177 *

ELB200-1

3/8 to 1/2

1-3/4

00178 *

ELB300-1

3/4 to 1

2-1/4

00179 *

ELB400-1A

1 to 2

3-3/16


* For small Elb surface grinders.
Larger Elb adapters can be manufactured as specials.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

52

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Wheel Adapters for Clausing 1020, 4020, Covel 35,
Covel 35B, Ingersoll Milling Co. and
Brown & Sharpe No. 5 Grinders.

1:5 TAPER RATIO, 3.500" TPF AND 3.000" TPF, WITH 1.03”, 1.31" AND 1.50"
DIAMETER AT LARGE END OF TAPER. FOR 1.25O”, 2.000" AND 3.000" ID WHEELS.


FOR CLAUSING
1020 GRINDERS.


SOPKO
CATALOG NO.

DIMENSIONS


A

C


00473

2

3-3/16

00474*

3

4-3/16

00473

00474


* Balancing style adapter.


FOR CLAUSING 4020, COVEL 35, AND COVEL 35B GRINDERS.


SOPKO
CATALOG NO.

SOPKO
PART NO.


(Front Side)

00693

(Taper Side)

00693

17-17H



These shrouded adapters, for Brown & Sharpe No. 5 surface grinders and the Ingersoll Milling Machine grinders, feature a 3/4" deep shroud that surrounds the wheelhead spindle nose and provides optimum protection against contamination. Fully HEAT TREATED, you can expect years of performance and with standard features like PRECISION GROUND TAPERS, and CONCENTRICALLY GROUND AND SQUARE surfaces, you’re assured of optimum cutting conditions too.

(Front Side)

00182

(Taper Side)


SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS


D

H


00182

23-1569

2-16LH

2.000

00183*

25-1569

3-16LH

3.000


* Most popular.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

53

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Wheel Adapters for Jones & Shipman Grinders.
15° INC ANGLE TAPER AND 3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.


Jones & Shipman 540 and 1400 series surface grinder adapters feature a 15° INC** high quality PRECISION GROUND TAPER for exceptional spindle engagement. Added value is achieved with CONCENTRICALLY GROUND AND SQUARE SURFACES along with THREAD GROUND OD threads to optimize cutting conditions and prolong wheel life. All adapter hubs are CARBURIZED AND HARDENED for durability.

05314


SOPKO
CATALOG NO.

DIMENSIONS


A

B

C

T


50136

1/4 to 3/4

2-1/4

1-7/8

15° INC **

50137

1/4 to 1/2

2-1/4

1-3/4

15° INC **

50111

1/2

3

1-3/4

15° INC **


05314

1/4 to 1/2

2-1/4

1-3/4

3.000 *


* Any 3.000" TPF, 1.00" LE adapter can be altered to taper length of 1-3/16”.
** Europe and Canada only.


Now you can protect the wheelhead spindle from the harsh realities of heat, swarf, and high pressure coolants with these quality Jones & Shipman 540 and 1400 series shrouded adapters. From taper to finish Sopko has designed these shrouded adapters for performance with standard features like:

  • High Quality Internal Tapers.

  • Thread Ground OD threads.

  • Heat Treated Component Parts.

  • Concentric and Square Ground Surfaces.

  • Black Oxide finish.


SOPKO
CATALOG NO.


00647†

00907

00647


** Europe and Canada only.
† Includes three piece bronze balancing weight set 00861.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

56

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

 


Wheel Adapters for Jones & Shipman Grinders.
FOR 13° 43’ 08” INC ANGLE TAPER* AND 2" STRAIGHT BORE WITH 1.605" DIAMETER AT
LARGE END OF TAPER.  FOR 5.000" ID WHEELS.


A tradition of quality manufacturing makes this Jones and Shipman series 1076 straight bore bolt-on flange balancing adapter an outstanding value. Two precison ground surfaces provide incomparable rigidity, and identical load bearing surfaces for the positive wheel lock and spindle driving torque that optimum surface finishes require. Manufactured from pre-heat treated alloy steel, the adapter is furnished with a three piece steel balancing weight set 00859, three 5/16-18RH x 1/2" SHCS 05941 flange bolts.


SOPKO
CATALOG NO.


01195

01195

(Front Side)



This premium quality Jones & Shipman series 1310 universal cylindrical grinder balancing adapter features the highest quality 13° 43’ 08” INC angle internal taper for precise spindle mounting and pre-heat treated hubs and nuts for strength and long life. Precision ground surfaces and thread ground threads provide unsurpassed wheel mounting parallelism for workpiece low-micro finishes. Adapter furnished with three piece bronze balancing weight set 00861.


SOPKO
CATALOG NO.


01836


01836
(Taper Side)

*Europe and Canada only.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

57

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

Wheel Adapters for Okamoto DX Series Grinders.
3.000" TPF AND 1:5 TAPER RATIO WITH 1.00" AND 1.75" DIAMETER AT LARGE END OF TAPER. FOR 1.250" AND 5.000" ID WHEELS.


Standard adapter for 6.18DX and 8.20DX saddle type surface grinders.

SOPKO 
CATALOG NO.
OKAMOTO PART NO. DIMENSIONS
C
00129  A521 1-15/16
02681*  - 2-3/64

* Balancing style adapter includes weight set 00862.

Bolt-on flange balancing adapter for 12.24DX, 16.24DX, 16.32DX, 20.24DX, 20.36DX and 20.40DX saddle type surface grinders.

SOPKO  
CATALOG NO.   
OKAMOTO PART NO. DIMENSIONS
B C H
00908† A621-3  5 3-1/4 3.000
00636**   A621-5 6-3/8 3-3/8 5.000
† Includes balancing weight set 00831 and 6 piece SHCS set 00614.
** Includes balancing weight set 00864 and 6 piece SHCS set 00614.
 
OPTIONAL SOCKET HEAD CAP SCREW SETS
ADAPTER WHEEL WIDTH RANGE   SCREW SET CATALOG NO. SCREW SIZE SET QTY
00636 27MM to 38MM (1" to 1.50") 01834 5/16-18 X 2-1/4 6
00908 1" 00614 5/16-18 X 1-1/4 6
1-1/2"  00615 5/16-18 X 1-1/2 6
** Includes balancing weight set 00864.
Select proper length screw sets from tabulation to lock specific grinding wheel widths.


ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

 

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

59

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Pope Style Wheel Adapters.*
3.000” TPF and 4.500” TPF WITH 1.00" AND .87" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.


Balancing, non-balancing, and shrouded type adapters are available for Pope Precision spindles. Made from 32 Rc alloy steel, these Pope style adapters feature concentric and square ground surfaces for optimum surface finishes. Thread ground OD threads assure safe, square wheel locking conditions and precisely ground internal tapers offer reliable spindle engagement.


SOPKO
CATALOG NO.

POPE
PART NO.

DIMENSIONS


A

D

E


00534

WS-100-1

1/4 to 3/4

1-1/4-16LH

-

00535

WS-100-2

1/4 to 3/4

1-1/4-16RH

-

00536

-

1/4 to 3/4

1-1/4-16LH

3/16

00537

-

1/4 to 3/4

1-1/4-16RH

3/16


00534



SOPKO
CATALOG NO.

DIMENSIONS


A

D

E


00529

1/8 to 5/8

1-1/4-16LH

3/16

00530

1/8 to 5/8

1-1/4-16RH

3/16

00531

1/4 to 5/8

1-1/4-16RH

1/8

00532

1/8 to 5/8

1-1/4-16LH

-

00533

1/8 to 5/8

1-1/4-16RH

-


00529



SOPKO
CATALOG NO.

POPE
PART NO.

DIMENSIONS


A

D

E


00542

WS-330-1

1/4 to 1

1-1/4-16LH

-

00543

WS-330-2

3/4 to 1

1-1/4-16RH

-

00544

-

3/4 to 1

1-1/4-16LH

3/16

00545

-

3/4 to 1

1-1/4-16RH

3/16


00827

Set of three hex weights for 00542, 00543, 00544, and 00545 balancing adapters.


00542



SOPKO
CATALOG NO.

DIMENSIONS


A

D

E


00546

5/8 to 1-1/4

1-1/4-16RH

1/8

00538

5/8 to 1-1/4

1-1/4-16LH

3/16

00539

5/8 to 1-1/4

1-1/4-16RH

3/16

00540

5/8 to 1-1/4

1-1/4-16LH

-

00541

5/8 to 1-1/4

1-1/4-16RH

-


* Lock ring 04278 is not included with any adapter listed on this page.

00538

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

60

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Large Taper Bolt-On Flange Balancing Wheel
Adapters for Larger Grinders.

3.000" TPF WITH 1.62" AND 2.25" DIAMETER AT LARGE END OF TAPER.
FOR 3.000" AND 5.000" ID WHEELS.



FIG. 1


FIG. 2


01812


00839

01353
(Front Side)

01351
(Taper Side)


SOPKO
CATALOG NO.

FIG.

DIMENSIONS


A

B

C

H


01351*†

1

1 to 1-1/2

7

3

5.000


01353*

1

1

4-15/16

2-1/2

3.000


01355**•

2

2-1/4 to 3

7

5-1/2

5.000



OPTIONAL SOCKET HEAD CAP SCREW SETS.


ADAPTER

WHEEL WIDTH
RANGE

SCREW SET
CATALOG NO.

SCREW SIZE

SET
QTY


01351

1 to 1-1/4

01812

5/16-18X2

6

1-1/2

01813

5/16-18X2-1/2

6


01353

3/4 to 1

01814

1/4-20X2

4

01355

2-1/4 to 2-1

01806

5/16-18X2

6

2-3/4 to 3

01807

5/16-18X2-1/2

6



01865

Three piece bronze balancing weight set for 01353.

00839

Three piece bronze balancing weight set for 01351.

00840

Three piece bronze balancing weight set for 01355.


All balancing style adapters include the three piece bronze balancing weight set.
See page 12 and 13 for standard taper balancing adapters.
* Price does not include optional nut 3/4-16LH 05020, 3/4-16RH 05021 on page 76 or snap ring 04291.
** Price does not include optional nut 7/8-14LH 05116, 7/8-14RH 05117 on page 76 or snap ring 04305.
Manufactured with snap ring groove. Snap ring not included.
Select proper length screw sets from tabulation to lock specific grinding wheel widths.
† Pope, Setco, and Whitnon.
• Setco

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

68

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888





 


Adapters for Rockwell, Rockwell-Delta,
Rockwell-Milwaukee Grinders, Harig, and
Model 25 Grinder Manufactured by
Gallmeyer & Livingston Co., Grand Rapids, MI.

3.000" TPF, 4.256" TPF, AND 4.250" TPF WITH 0.87", 1.00", AND 1.12" DIAMETER
AT LARGE END OF TAPER. FOR 1.250" ID WHEELS.


Adapters for Rockwell, Rockwell-Delta, and Rockwell-Milwaukee grinders.


00815


SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS


D


00815

24-816-LH

1-1/4-16LH

00816

24-816-RH

1-1/4-16RH



TML adapter for older Harig surface grinders.


(Front Side)


(Taper Side)


SOPKO
CATALOG NO.


00169


00169


The Gallmeyer & Livingston Model 25 Grand Rapids Hydraulic Feed Grinder adapters feature a SHROUDED DESIGN to keep contamination away from the spindle. State of the art THREAD GRINDING of the hub, and CONCENTRIC AND SQUARE GROUND FLANGE SURFACES provide better workpiece finishes because the grinding wheel is locked precisely against the adapter face. Lasting quality, performance, and value are optimized with HEAT TREATING and BLACK OXIDE FINISH.


00528


SOPKO
CATALOG NO.

DIMENSIONS


A

C


00526

1/2 to 3/4

1-9/16

00527

1

1-7/8

00528

1 to 1-1/4

2-1/16


 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

71

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888