Wheel Adapters for Abrasive (Gardner),
DeVlieg, and ELB Grinders.

2.972" TPF, 3.000" TPF, AND 11° 20' INC ANGLE TAPER WITH 1.12", 1.00", AND
.98" DIAMETER AT LARGE END OF TAPER. FOR 3.000" AND 1.250" ID WHEELS.


The 00813 ABRASIVE (GARDNER) No. 1-1/2, 10"x15" manual surface grinder adapter features a 13/16" deep shrouded design to keep contaminants away from the spindle.
To maximize cutting conditions and to prolong wheel life, Sopko provides PRECISION GROUND TAPERS, and CONCENTRIC AND SQUARE SURFACES. OD threads are GROUND and hubs and nuts are HEAT TREATED FOR STRENGTH.


SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS


A


00813

ABR 1-1/2

1/2 to 2


00813


The 00191 DEVLIEG MICRO-POINT GRINDER ADAPTER is designed for plate-mounted grinding wheels with the abrasive medium bonded to a steel wheel. Four 1/4-20 tapped holes, used to lock the wheel in place, are positioned on a 2" diameter center-line. Assembled with hub and 3/8" spacer, 1/4-20 screws are not included.


SOPKO
CATALOG NO.

SOPKO
PART NO.


00191

DV262


00191


For older ELB GRINDERS and new MIGHTY FREEPORT 618 GRINDERS.


00177


SOPKO
CATALOG NO.

SOPKO
PART NO.

DIMENSIONS


A

C


00177 *

ELB200-1

3/8 to 1/2

1-3/4

00178 *

ELB300-1

3/4 to 1

2-1/4

00179 *

ELB400-1A

1 to 2

3-3/16


* For small Elb surface grinders.
Larger Elb adapters can be manufactured as specials.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

52

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888