Cincinnati Taper New Style and Old Style Conversion Adapters.*
ID IS 4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.
OD IS 3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
MOUNT STANDARD TAPER ADAPTERS ON CINCINNATI TAPER SPINDLES.


Designed for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper, this conversion adapter allows you to mount any Standard Taper (3.000" TPF) adapter to your Cincinnati Taper spindles. Furnished with special spindle mounting bolt 04249.
A 1-1/4 wrench flat on the body makes installation and removal easy.

50081

SOPKO
CATALOG NO.

50081

 

Designed for older Cincinnati flat belt center driven spindles, this conversion adapter features a Cincinnati Taper (4.500" TPF) in the ID and a Standard Taper (3.000" TPF) on the OD.
Now you can confidently mount standard taper adapters on your Cincinnati taper spindles. Furnished with a 1/2-13 hex spindle nut. A 1-1/16 wrench flat on the body makes installation and removal easy.

00114

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

D

00113 S113 1/2-13LH
00114 S114 1/2-13RH

*For additional double taper conversion quills see page 85, 86, 87, 88 and 89.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

41

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888