Standard Taper Cup Wheel Extended Adapters.
3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
FOR 1.250" ID WHEELS.
Sopko cup wheel adapters are made with a THIN WALL FRONT FLANGE design to give maximum usage of cup wheel depth. Fully HEAT TREATED and made from SOLID BAR STOCK, Sopko cup wheel extension adapters are RIGID to provide positive wheel lock. A hardened and ground nut locks the wheel from the back of the adapter. Because of this nut configuration, RH threads are used for CW spindle rotation and LH threads are used for CCW rotation; providing a safe locking system that WILL NOT LOOSEN UP during spindle rotation.

00263 00265
SOPKO
CATALOG NO.		 SOPKO
PART NO.		 DIMENSIONS
C D
00263 200-1CW 2-1/2 1-1/4-16LH
00264 200-2CW 2-1/2 1-1/4-16RH
00265 - 3-1/2 1-1/4-16LH
00266 - 3-1/2 1-1/4-16RH

*Grinding wheel not included.
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

15

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

Cincinnati Taper Flanged and Cup
Wheel Extension Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS. USED ON ALL CINCINNATI NO. 1 AND NO. 2 SPINDLES, COVEL, AND GALLMEYER & LIVINGSTON CUTTER GRINDERS; OR ANY SPINDLES WITH .87" DIAMETER AT LARGE END OF TAPER AND 4.500" TPF.

Sopko flanged adapters are machined from forged alloy steel. The resulting one-piece hub design distributes mounting pressures away from the bore, the weakest part of the grinding wheel. The inherent rigidity of one-piece design and the precision ground flange provides identical radial load-bearing surfaces for positive wheel lock and better spindle driving torque to the abrasive wheel. All surfaces are ground concentric and square for optimum surface finishes. Completely heat treated, Sopko flanged adapters are safe to use and maintain their rigidity.
00457
SOPKO
CATALOG NO.		 SOPKO
PART NO.		 DIMENSIONS
A D E
00446

C4.5-1

 0 to 1/2 1-1/4-16LH -
00564*

C4.5-1KW

 0 to 1/2 1-1/4-16LH 1/8
00158

C4.5-2

 0 to 1/2 1-1/4-16RH -
00457*

C4.5-2KW

 0 to 1/2 1-1/4-16RH 1/8

*Spindle mounting bolt 14362 and retaining ring 04269 included.

Sopko cup wheel adapters are made with a THIN-WALL FRONT FLANGE design to give maximum usage of cup wheel depth. Fully HEAT TREATED, and made from SOLID BAR STOCK, Sopko cup wheel extension adapters are RIGID to provide positive lock. A hardened nut locks the wheel from the back of the adapter. Because of this nut configuration, RH threads are used for CW spindle rotation and LH threads are used for CCW rotation; providing a safe locking system that WILL NOT LOOSEN during spindle rotation.
00289

00290†
SOPKO
CATALOG NO.		 SOPKO
PART NO.		 DIMENSIONS
A D E
00289   

C200-2CW

 3/8 to 5/8 1-1/4-16RH -
00290**

C200-2CWKW

 3/8 to 5/8 1-1/4-16RH 1/8

** Includes spindle mounting bolt 14362 only.
†Grinding wheel not included.
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

33

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888